After attaching all necessary cables to your monitor and computer,
(See Attaching the Cables for cable attachment,)
use the cable holder to neatly organize all cables as shown above.
HAS extends vertically up to 130mm via the stand lock release button.
Note: If locked in the down position, press the stand lock release button on the bottom rear of
HAS. Lift the front panel up and extend the stand to the desired height.
Note: Before relocating/moving the monitor to a different location, make sure that
the stand is LOCKED DOWN. To lock it down, lower the height of the panel until it clicks
and is locked into place.
1. In locked/down Position
- Tilt upwards, so that lower edge of monitor clears the stand.
- Rotate clockwise until the monitor stops at 90 °.
2. Extended Position
- Rotate clockwise until the monitor stops at 90 °.
Note: To take advantage of the "Display Rotation" function (Landscape versus Portrait view)
an updated graphics driver is required for your Dell Computer not included with this monitor.
Please download the graphics driver from http://www.support.dell.com
and refer to the "download" section
for "Video Drivers" for latest driver updates.
Note: When in "Portrait View Mode", you may experience performance degradation in graphic-intensive
applications (3D Gaming etc.)
